Canon NP6012 Service Manual page 174

MB MECHANICAL SYSTEM
5) Open the copier's top unit; and fix it in 7) Remove the springs ® and ©.
position using the grip of the screwdriver
(about 30 mm dia.).
Figure 4-311
8) Remove the springs @ and ®; then,
while extending the bushing 4, remove
the registration roller unit @.
Figure 4-309
6) Remove the feed roller @ and the spring
©; then, remove the transfer mount unit
© and the high-voltage terminal unit @)
Figure 4-312
9) Disconnect the two connectors (4, and
remove the screw (9); then, remove the
solenoid @.
Figure 4-310
Figure 4-313
4-24 COPYRIGHT © 1995 CANON INC. CANON NP6O12/NPSOT2F /NP6212 REV.1 SEPT. 1995 PRINTEDIN JAPAN {IMPRIME AU JAPON}