Canon NP6012 Service Manual page 178

ME MECHANICAL SYSTEM
5) Open the copier's top unit; and fix it in 7) Remove the springs ® and ©.
position using the grip of the screwdriver
(about 30 mm dia.}.
Figure 4-329
8) Remove the springs {) and @; then,
while extending the bushing (, remove
the registration roller unit ©.
Figure 4-327
6) Remove the feed roller @ and the spring
©; then, remove the transfer mount unit
© and the high-voltage terminal unit ®)
Figure 4-330
Figure 4-328
4-28 COPYRIGHT © 1995 CANONINC, CANON NP8O12/ NPGOI2F /NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (IMPRIME AU JAPON}