Tools And Test Equipment - GE Innova 2121-IQ Biplane Preinstallation Manual

GE Healthcare

2 Tools and Test Equipment

Refer to Table
Table 7-2, refer to the appropriate component Pre-Installation Manual listed in
Compatibility.
Table 7-2:
PRODUCT OR COMPO‐
NENT
Innova LC Positioner
Innova LP4 Positioner
Status Display
Omega Table
C2 LC/LP cabinet
X-Ray Head
C1 Cabinet
Chapter 7 Additional Planning Aids
Innova 2121-IQ/3131-IQ Biplane Cardiovascular Imaging System Pre-Installation Manual
7-2. To obtain a list of tools and test equipment for components not specified in
TOOL OR TEST EQUIP‐
MENT
Service Engineer's Tool
Case
Level, Protractor Type
Plumb Line included in
46-216640G1
Torque Wrench 2 to 20
daN.m (15 ft. lbs. to 150
ft. lbs.)
1/2 inch Ratchet Wrench
(2)
Wrench, Spanner
(46-176584P1)
Laptop Computer (MS-
DOS Windows)
Ladders
LP4 Toolcase (shipped
with LP4)
5-axis Laser Alignment
tool (shipped with PIM kit)
Same as for Innova LC (Service Engineer's Tool Case)
Same as for Innova LC (Service Engineer's Tool Case)
Same as for Innova LC (Service Engineer's Tool Case)
Same as for Innova LC (Service Engineer's Tool Case)
Same as for Innova LC (Service Engineer's Tool Case)
Same as for Innova LC (Service Engineer's Tool Case)
USED FOR
General Use
Positioner Checks
Positioner Checks
Positioner Checks
Raise and Lower Posi‐
tioner shipping dolly
High Voltage Cable In‐
stallation
Positioner Configura-tion
and Calibration
Installation
Installation
Installation
Direction 5177951-4-1EN, Revision 1
Chapter 2, System
SOURCE RECEIVED (DATE)
197