GE Innova 2121-IQ Biplane Preinstallation Manual page 132

GE Healthcare
NOTE: With any kind of fixation methods (Bolts M20, Mechanical anchors or Chemical anchors),
the number of holes used mandatory is:
•
•
•
we can have only 2 consecutive holes omitted.
Pull out efforts and recommendations about chemical anchors not provided by GE.
The following table provides the recommended chemical anchors for Omega/LC baseplates and
for the floor plate ordered locally that they could be used instead of bolts provided by GE.
Table 5-5: Chemical anchors Pull out efforts and recommendations
Mark
Pull out effort
Number of holes in the
plate
Recommended chemi‐
cal anchors example 1
Threaded rod
Hole diameter in the
floor
Hole depth in the floor
Minimum floor thick‐
ness
Max Tightening Torque 80 N.m
NOTE: The floor plate ordered locally needs to be in steel.
Refer to supplier technical documents for all specification and installation data about
chemical anchors.
132
Innova 2121-IQ/3131-IQ Biplane Cardiovascular Imaging System Pre-Installation Manual
Gantry baseplate : 12 max and 8 min holes used are acceptable
Table baseplate : 10 max and 8 min holes used are acceptable
Floor baseplate : 24 max and 12 min holes used are acceptable
Gantry baseplate
I on Illustration 5-30
736 daN per bolt if 12
used and 1992 daN per
bolt if 8 used
12 max (8 min mandato‐
ry)
Supplier HILTIHVU ad‐
hesive capsule + HAS
Anchor rod
M16 A4-70 / 333 131 5/8 M20 A4-70 / 333 135 3/4 M20 A4-70 / 333 135 3/4 M16 A4-70 / 333 131 5/8
18 mm
(11/16 in)
125 mm
(5 in)
180 mm
(7 in)
(59 ft-lb)
Table baseplate Omega Table Omega
J on Illustration 5-30 A on
1120 daN per bolt if 10 4432 daN per bolt with 4
used and 2000 daN per bolts
bolt if 8 used
10 max (8 min mandato‐ 4 mandatory
ry)
Supplier HILTIHVU ad‐ Supplier HILTIHVU adhe‐
hesive capsule + HAS sive capsule + HAS An‐
Anchor rod chor rod
24 mm 24 mm
(7/8 in) (7/8 in)
170 mm 170 mm
(6-5/8 in) (6-5/8 in)
220 mm 220 mm
(8-1/2 in) (8-1/2 in)
150 N.m 150 N.m
(110 ft-lb) (110 ft-lb)
Direction 5177951-4-1EN, Revision 1
Floor plate (to be ordered
locally)
Illustration 5-31 K on Illustration 5-30
272 daN per bolt if 24 used
and 2008 daN per bolt if 12
used
24 max (12 min mandato‐
ry)
Supplier HILTIHVU adhe‐
sive capsule + HAS Anchor
rod
18 mm
(11/16) in
125 mm
(5 in)
180 mm
(7 in)
80 N.m
(59 ft-lb)
2 Mounting Requirements