Printronix P8000 Plus Series Administrator's Manual page 159

Table of Contents

Advertisement

Absorb After ^PY
Absorb Motion (factory default). The first paper motion following a ^PY command is ignored.
Absorb All. The system ignores all the data and terminator until a host generated motion terminator
is detected.
Disable. System terminators following a graphics command are sent to the printer and result in paper
motion.
UPC Descenders
Enable (factory default). UPC/EAN barcodes are printed with descenders, even if there is no human
readable data.
Disable. UPC/EAN barcodes are printed without descenders if there is no human readable data.
Rot. Char Size
Adjusted (factory default). Rotated (clockwise/counterclockwise), expanded characters have a
different size than an unrotated character with the same size parameters.
Not Adjusted. Rotated, expanded characters are the same size as unrotated characters with the
same size parameters.
Ignore Spaces
Disable (factory default). Trailing spaces are not deleted from the last alphanumeric element in a
graphics pass.
Enable. Trailing spaces are deleted from the last alphanumeric element in a graphics pass.
Midline PY (includes ^PN)
Disable (factory default). The Graphics mode Enable command, ^PY, must be the first three
characters of a line.
Enable. The ^PY or ^PN can occur anywhere in a line.
Print Quality
Data Processing (factory default). ALPHA text and barcodes are printed in normal mode at 60 x 72
dpi. This mode should be set if the highest speed is desired.
High. ALPHA text and barcodes are printed in dark mode at 120 x 72 dpi.
Expanded Font
Scalable (factory default). These expanded characters have rounded edges.
Block. These are block characters compatible with IGP-X10 printers.
LP+ Font
Disable (factory default). The IGP/VGL uses its default half-dot font, which is slightly different from
the standard bitmap font used by LP+ at 12, 13, 15 and 17 cpi.
Enable. The IGP/VGL uses the same font as used by LP+ at all cpi.
MSI Check Digit
Print (factory default). The check digit is appended at the end of the printable data field for MSI
barcodes.
Don't Print. The check digit for MSI barcodes does not print.
159

Advertisement

Table of Contents
loading

This manual is also suitable for:

P8000 series

Table of Contents