Table of Contents
Advertisement
Translation Tbl
Prints out a table of the Coax interface's current character set. This operation is valid only when the
TN3270 interface is the current interface.
Active Char Set
Specifies which character language set will be the active set.
•
Secondary Sets (factory default)
•
Primary Sets
Prt Partial Line
•
Enable (factory default). When this option is enabled, it forces the printer to print if a partial line is in
the printer (i.e. line not ending with a LF).
•
Disable. When disabled, the last partial line of data will not be printed.
Early Print Cmpl
Early Print Complete allows the printer to send Print Complete status to the host before the printer is
actually done printing all data. Early Print Complete is only available if the IPDS feature is installed.
•
Disable (factory default). Means the printer will suppress the Early Print Complete response until all
printing is complete.
•
Enable. Means the printer will send an acknowledgement to the host when it is able to accept more
data.
NOTE: When an Early Print Complete is enabled and an error occurs, the data in the printer will remain
in the buffer (regardless of the setting of the Cancel Buffer option). It is recommended that local
procedures be followed to recover from the error.
Do not select Early Print Complete while a print job is in progress. If this is done you will need to
restart the printer.
PTX Transparent
Lead-in Chars
You can enable additional printer features which are not accessible through standard TN3270 emulations.
To access these features, send text commands in the data stream. The commands must have a start and
end code. Four sets are available:
•
Set 1. start code: <% (factory default)
stop code: >
•
Set 2. start code:
stop code: $
•
Set 3. start code: _%
stop code: _
•
User Defined.
93
Advertisement
Table of Contents
