Table of Contents
Advertisement
CPI/LPI Select
Defines the default values for the horizontal and vertical character spacing. The number of characters per
inch can range from 10.0 through 17.1. The number of lines per inch can range from 3.0 through 8.0.
Font Attributes
Typeface
Choose a typeface from the available options.
Prop. Spacing (Proportional Spacing)
Each printed character is contained inside a character cell. The width of the character cell includes the
character and the space around the character.
•
Disable (factory default). Each character cell is printed with the same width. Each column in the
printed text will line up.
•
Enable. The width of each character cell varies with the width of the character. For example, [i] takes
less space to print than [m]. Using proportional fonts generally increases the readability of printed
documents, giving text a typeset appearance.
Bold Print
•
Disable (factory default). Text is printed normally.
•
Enable. Text is printed with a heavy line thickness.
Slashed Zero
This parameter allows you to print the numeral "0" with or without the slash. This option applies to all
character sets except OCR-A and OCR-B.
•
Disable (factory default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Page Format
Margins
•
Left Margin. Defines where the first print column is located. The left margin is specified as the
number of characters from the left edge of the form.
•
Right Margin. Defines where the last print column is located. The right margin is specified as the
number of characters from the right edge of the form.
•
Top Margin. Defines the location of the first print line on the page. The top margin is specified as the
number of lines from the top of the form's position.
•
Bottom Margin. Defines the location of the last print line on the page. The bottom margin is specified
as the number of lines from the bottom of the form's position.
140
Advertisement
Table of Contents
