CR At MPP+1
MPP is Maximum Print Position, which is also known as line length. This option controls a carriage return
at the end of a print line and at MPP+1.
•
On (factory default). Produces a carriage return to the first print position of the next line.
•
Off. Produces a carriage return to the first print position of the current line.
NL At MPP+1
Controls how many lines are skipped when the carriage returns to a new line.
•
On (factory default). Moves to the first print position two lines down from the current position.
•
Off. Moves to the first print position of the next print line.
Position Aft FF (4234 only)
Allows you to select the location of the print position after a form feed command is sent.
•
On. Sets the printer to print at print position 1 of the first print line on the next form.
•
Off (factory default). Sets the printer to print at print position 2 of the first print line on the next form.
Last Char = FF
Determines the print line position when a form feed command is the last code encountered in the print
buffer.
•
On (factory default). Moves to the first print position on the second line of the next form.
•
Off. Moves to the first print position on the first line of the next form.
NOTE: This option is ignored if Auto Skip At End is on.
If configured as a 3287, and a form feed occurs in the middle of a print buffer, the printer defaults to the
first print position on the second line of the next form regardless of the setting of this option.
Null Suppression
•
Off (factory default). Ignores nulls. The print position does not move.
•
On. Treats nulls as blank spaces.
FF Validity
Determines if the position of a form feed command affects its execution.
•
Off (factory default). Performs a form feed only if it occurs at the first print position in a line or at
Maximum Print Position +1. A form feed command at any other position is recognized as a space.
•
On. Allows the printer to perform a form feed command anywhere in the data stream.
Auto Skip At End
Specifies whether or not to perform an automatic form feed at the end of a print buffer. If form feed is the
last character in the print order, the form feed function is supplied by the Auto Skip At End option.
•
Off (factory default). Sets the printer to print at print position 1 of the next line.
•
On. Sets the printer to print at print position 1 of the first line of the next form.
95