Windows10
9. After installation is complete, click "Finish" to close the wizard.
10. To verify installation, go back to the Control Panel and select "System" for WinXP. Under the
"Hardware" tab, select "Device Manager".
For Windows 7 or Windows 10, select "Device Manager" directly from Control Panel.
11. Select the "Network Adaptors" and expand the selection if necessary. You should see "Microsoft
KM-Test Loopback Adaptor" for Windows 10 and "Microsoft Loopback Adaptor" for Windows 7/XP
listed. Leave all default settings.
Figure 36 Starting the Installation
Windows 10
Figure 37 Complete Hardware Installation
Windows 7/XP
Windows 7/XP
231