Define LF Code
•
LF = CR + LF (factory default). Forces an automatic carriage return with each line feed command
received. The next print position is print position 1 of the next line.
•
LF = LF. Does not perform an automatic carriage return when a line feed command is received. The
next print position will be the current print position of the next line.
Compressed Print
Controls which host command sets compressed printing.
•
Char 01 SOH (factory default)
•
Char 03 ETX
•
Char 09 HT
Elong/Alt. Font
Controls which host command sets elongated (double high) fonts and extended character set.
•
Elng=BS Font=SO (factory default)
•
Elng=SO Font=BS
HS Print (High Speed Print)
Controls which host command sets high speed printing.
•
Char 02 STX (factory default)
•
Char 03 ETX
•
Char 09 HT
VFU Select
Controls how the printer handles vertical formatting. The choices are:
•
EVFU (factory default). Enables the VFU and selects P-Series compatible Electronic Vertical Format
Unit (EVFU).
•
DVFU. Enables the VFU and selects the Dataproducts compatible Direct Access Vertical Format Unit
(DVFU).
•
CVFU. Enables the VFU and selects the Centronics compatible Direct Access Vertical Format Unit
(CVFU).
•
Disable. Disables all VFU processing.
Upr. Case Select
Controls how the printer handles lowercase characters it receives from the host computer. When enabled,
all characters will be printed in uppercase.
•
Disable (factory default). Prints lowercase characters received from the host computer as lowercase,
and prints uppercase characters received from the computer as uppercase.
•
Enable. Prints lowercase characters received from the host computer as their corresponding
uppercase equivalents; uppercase characters received from the computer print as uppercase.
128