Table of Contents
Advertisement
Displayed Message
WELD SNSR MISSING
See User Manual
XXXX
CHECKING PATTERN
XXXX
MEMORY FAILURE
XXXX
WRITING PATTERN
1
Before contacting an authorized service representative, power off the printer, wait 15 seconds, then
power it back on and rerun your print job. If the message reappears, press CLEAR. If the fault message
still displays, then contact your authorized service representative.
268
Table 23 LCD Message Troubleshooting Table (ASCII)
Can User
Correct?
Yes
The incorrect cartridge
type is being used for
the printer.
No
Running power on
memory test.
No
Memory in bank xxx has
failed. Power on memory
test.
No
Running power on
memory test.
Explanation
1.
2.
3.
No action is required.
Contact your authorized service
representative.
No action is required.
Solution
Make sure the correct
ribbon cartridge type is
installed.
Make sure the cartridge is
properly seated.
Contact your authorized
1
service representative.
1
Advertisement
Table of Contents
