Printronix P8000 Plus Series Administrator's Manual page 148

•
Disable (factory default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is 1/6 inch from the top of
one print line to the top of the next print line. The options are:
•
6.0 (factory default)
•
8.0
•
9.0
•
10.0
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using the ALPHA command.
•
Disable (factory default). The printer will print text in upper and lowercase.
•
Enable. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data before a PGL command is received.
•
Enable (factory default). The printer ignores all data on the current line before an IGP command.
•
Disable. The printer will print all data on the current line before an IGP command.
Forms Handling
This submenu allows the user to handle the form in the following ways:
•
Disable (factory default). No effect.
•
Auto Eject. Automatically ejects a page at the end of the job to spill out the last page.
•
Auto TOF. Automatically does a form feed (FF) at the end of each form to the next top of form.
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when the printer is powered on.
•
Enable (factory default). The PGL is enabled when the printer is powered on. (The PGL feature is
initialized in the Normal mode.)
•
Disable. The PGL is disabled when the printer is powered on. (The PGL feature is initialized to the
Quiet mode.)
Ext Execute Copy
•
Disable (factory default). Dynamic data and overlay data are not allowed if the optional Form Count
parameter (number of forms to print) is specified as part of the Execute command. (This setting is
IGP-100 compatible.)
•
Enable. Only dynamic data is allowed within a form in which the Form Count parameter is specified in
the Execute command. In this case, the exact same form (with identical dynamic data, etc.) is printed
for the Form Count. However, incremental data is not incremented since the page that is printing is
exactly the same. Also, each form is printed on a separate page.
148