Table of Contents
Advertisement
Code Page
Subset
Thai
DRAFT 10*
Version 0*
DRAFT 12
Version 1
DRAFT 13
DRAFT 15
Version 2
DRAFT 17
DRAFT 18
DP 10
DP 12
DP 13
DP 15
DP 17
DP 18
NLQ 10
NLQ 12
NLQ 13
NLQ 15
NLQ 17
NLQ 18
OCRA
OCRB
PSM
A general discussion about starting and stopping IPDS can be found in the IBM 4234 Product and
Programming Reference Manual (GC31-3879). Sending a non-IPDS data stream to an IPDS printer and
vise versa will result in a hung spool file or writer.
Font Size
This parameter chooses the font size which will be used by IPDS.
•
Select By Host (factory default). The font ID is only affected by host commands.
•
Standard. The font ID is converted to a decompressed font ID.
•
Compressed. The font ID is converted to a compressed font ID.
Print Quality
This parameter chooses the print quality.
•
Select By Host (factory default). The application decides the print quality.
•
Default Font. The default font the printer uses.
Graphics Quality
This parameter chooses the print quality of graphics.
•
High (factory default). Graphics are printed at 144 dot rows per inch.
•
Select By Host. The application decides the quality of the graphics.
•
Low. Graphics are printed at 72 dot rows per inch.
166
Default
VPA Check
Font
Enable*
Disable
*=
Factory Default
Print IPDS
Hexdump
Fonts
Mode
Disable*
Enable
Emulation
Undef Char
Mode
Subst
0x60*
None*
0x40 – 0xFE
4234
67xx
64xx/65xx
4224
Advertisement
Table of Contents
