Table of Contents
Advertisement
A notification displays indicating that the web page will refresh upon download completion.
PTX_SETUP Download
Use PTX_SETUP to load files into the Main File System. Refer to the PTX_SETUP Chapter in the PGL
Programmer's Reference Manual for details.
Example loading a font named ARIAL.TTF:
!PTX_SETUP
FILE_IO-CAPTURE;"ARIAL.TTF" PTX_END
Arial TrueType font binary data.
NOTE: DO NOT add LF/FF to the end of the binary data.
!PTX_SETUP
FILE_IO-CAPTURE;"" PTX_END
Manual Two-Key Download
1. Start a Windows Command Prompt session.
2. Navigate to the directory with the target file (e.g., c:\download).
3. Download cnvt2fls.exe from the Printronix Website and move it to the directory with the target file.
4. Convert the file to a downloadable format using the following command at the command prompt:
cnvt2fls file_name1 file_name2 file_name3 A FONT <Enter>
where
•
file_name1 is the name of the file to be converted into the downloadable format.
•
file_name2 is the name of the file of the output file that will be downloaded into the printer.
•
file_name3 is the name of the file within the Main File System.
NOTE: The FONT parameter should only be used with fonts; otherwise, omit this parameter
Example:
cnvt2fls arial.ttf arial.dwn ARIAL.TTF A FONT <Enter>
This example creates the file "arial.dwn" that will place "ARIAL.TTF" into the Main File System.
236
Figure 41 File Download Notification
Advertisement
Table of Contents
