Table of Contents
Advertisement
Windows Driver Download
NOTE: This download method requires firmware in the form FILENAME.prg.
1. Make sure the printer is powered up, in the ONLINE mode and that desired host IO cables are
connected.
2. Install the Windows Driver Win8, Win10, Server 2012, Server 2016. Drivers can be found on the
http://www.printronix.com/products/drivers.aspx website.
3. Once the Windows Driver is installed on the PC, open Printers under Settings.
4. Click on desired driver -> Manage -> Printing Preferences -> Advanced.
5. Click the Firmware Update button as in Figure 28.
6. Enter the full path and location to the printer software. For example, c:\download\FILENAME.prg
where c:\download is the directory where FILENAME.prg resides.
7. Click OK to send the software to the printer. To abort this operation, click Cancel.
8. When the new software has successfully loaded into flash memory and the printer has reset itself, the
process is complete.
Figure 28 Updating Firmware
223
Advertisement
Table of Contents
