Table of Contents
Advertisement
•
Enable. The ASCII characters print position shifts up to align (horizontally) with standard ASCII
characters.
If Indian character sets, such as Hindi, Kannada, Gujarati or Tamil are selected, the menu will
automatically switch to Disable. Enable will not be available for selection until non-Indian character sets
are selected.
If the "Tall ASCII Font" option is available, the menu automatically switches to Disable. Enable will not be
available for selection until the Tall ASCII Font is disabled.
Compressed Mode (H-Series)
This parameter allows you to specify the appearance of ASCII/DBCS characters in ASCII mode. It is not
applicable for the H-Series Hangul printer.
•
Disable (factory default)
•
Enable. Prints out ASCII mode ASCII characters and half-width DBCS characters.
DBCS Compressed (H-Series)
This parameter allows you to specify the appearance of ASCII/DBCS characters in DBCS mode. It is not
applicable for the H-Series Hangul printer.
•
Disable (factory default)
•
Enable. Both the DBCS and ASCII characters will be printed as half-width of their original size.
Font Scale (H-Series)
This parameter allows you to specify the appearance of the font size. It is applicable for the H-Series GB
printer.
•
Standard (factory default). The character prints as 24 x 24 cell size.
•
16 x 24. The character prints as 16 x 24 cell size.
Encoding (H-Series)
•
Address Table (factory default). Specifies the address table supported.
GB18030 is for Hanzi GB printer.
BIG5 (factory default), CNS, TCA, ETEN, IBM5550, TELETEXT, BIG5+, BIG5E, and HKSCS are for
Hanzi Big5 printer.
KSC5601 is for Hangul printer.
Shift-JIS is for Kanji printer.
•
UTF-8. The printer takes in UTF-8 data stream and prints out according to Unicode format.
Taller 15 CPI (H-Series)
This parameter allows you to specify the appearance of ASCII characters as 15 CPI in ASCII mode.
•
Disable (factory default). The characters in 15 CPI appear shorter than other CPIs such as 10 CPI.
•
Enable. The height of 15 CPI characters is the same as other CPIs such as 10 CPI.
Horizontal Expnd (H-Series)
This parameter allows you to specify dot character horizontal expansion for both ASCII and DBCS
characters in DBCS mode.
117
Advertisement
Table of Contents
