Table of Contents
Advertisement
Default Font
Choose a font quality and size from the available selections. All fonts in the Default Font menu are
available in standard and compressed vertical resolution (see page 165).
VPA Check
•
Enable (factory default). The printer checks for dots that fall outside the intersection of the logical and
physical pages. If dots fall outside the area, the printer reports an error to the host if the IPDS
Exception Handling Control command setting requires error reporting.
•
Disable. The printer does not report dots outside the valid printable area.
Hexdump Mode
A hex code printout (or hex dump) translates all incoming data to hexadecimal equivalents. A hex dump
lists each ASCII data character received from the host computer, together with its corresponding two-digit
hexadecimal code. Hex dumps can be used to troubleshoot some types of printer data reception
problems.
Print IPDS Fonts
This feature allows you to print a list of all resident fonts currently available in the active IPDS emulation
Undef Char Subst
Specifies the replacement character to print in place of any unprintable character that is received by the
host.
•
0x60 (Factory default)
•
0x40 - 0xFE
Emulation Mode
Specifies the printer model to emulate.
•
None (Factory default) Use this option when a legacy configuration is loaded with PNE.
•
4234 IBM 4234
•
67xx Decision Data 67xx
•
64xx/65xx IBM 6400 / 6500 Series
•
4224 IBM 4224
168
Advertisement
Table of Contents
