Adjusting The Damping Force (Fjr13Esg) - Yamaha FJR13AG Service Manual

Direction "a"
Rebound damping is increased (sus-
pension is harder).
Direction "b"
Rebound damping is decreased (sus-
pension is softer).
Rebound damping
Adjustment value from the start
position (Soft)
22 click (s) out*
Adjustment value from the start
position (STD)
12 click (s) out*
Adjustment value from the start
position (Hard)
1 click (s) out*
* With the adjusting knob fully turned in
a
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
Compression damping (right side only)
ECA13590
NOTICE
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Compression damping
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Turn the adjusting knob "1" in direction "a"
or "b".
Direction "a"
Compression damping is increased
(suspension is harder).
Direction "b"
Compression damping is decreased
(suspension is softer).
1
b
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
3-21
PERIODIC MAINTENANCE
Compression damping
Adjustment value from the start
position (Soft)
32 click (s) out*
Adjustment value from the start
position (STD)
11 click (s) out*
Adjustment value from the start
position (Hard)
1 click (s) out*
* With the adjusting screw fully turned in
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS32010
ADJUSTING THE DAMPING FORCE
(FJR13ESG)
This model is equipped with an electronically ad-
justable suspension system. The damping force
of the front fork legs and rear shock absorber
can be adjusted. Within each preload setting,
there are 3 damping force settings:
"HARD" (hard),
"STD" (standard) and
"SOFT" (soft).
When the preload setting is changed, the damp-
ing force settings will change accordingly. (The
electronically adjustable suspension will auto-
matically adjust to the damping force settings
last set for that preload setting.) To further finely
adjust the damping force, each damping force
setting can be set to 7 different levels.
1. Adjust:
• Damping force
TIP
If the preload setting was not completed correct-
ly:
• The damping force setting and setting level will
flash 4 times and cannot be adjusted if you try
to adjust them while the vehicle is stopped.
• The preload setting pictogram will flash and the
damping force cannot be adjusted if you try to
adjust it while the vehicle is moving.
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲