Yamaha FJR13AG Service Manual page 757

Table of Contents

Advertisement

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
Fault code
Item
No.
P0657
Fuel system voltage
(incorrect voltage sup-
plied to the fuel injec-
tor and fuel pump)
P1400
Air induction system
solenoid (open or
short circuit detected)
P1600
Signals cannot be
(FJR13ES
transmitted between
G)
the ECU and the IMU.
P1601
Sidestand switch
(open or short circuit
of the black/red lead
of the ECU is detect-
ed)
P1602
Malfunction in ECU
internal circuit (mal-
function of ECU pow-
er cut-off function)
Probable cause of
malfunction
• Open or short cir-
Engine is difficult to
cuit in wire harness
start.
between relay unit
Increased exhaust
and ECU.
emissions.
• Open circuit in wire
harness between
battery and ECU.
• Defective relay unit.
• Malfunction in ECU.
• Open circuit in wire
Increased exhaust
harness.
emissions.
• Disconnected cou-
pler.
• Defective air induc-
tion system sole-
noid.
• Defective driver
(malfunction in
ECU).
• Open or short cir-
Engine cannot be
cuit in wire harness.
started.
• Malfunction in IMU.
• Malfunction in ECU.
• Defective coupler
Engine cannot be
between relay unit
started.
and ECU.
• Open or short cir-
cuit in wire harness
between relay unit
and ECU.
• Defective coupler
between sidestand
switch and relay
unit.
• Open or short cir-
cuit in wire harness
between sidestand
switch and relay
unit.
• Defective sidestand
switch.
• Malfunction in ECU.
• Open or short cir-
Engine idling speed is
cuit in wire harness
unstable.
between battery and
Engine idling speed is
ECU.
high.
• Open or short cir-
Increased exhaust
cuit in wire harness
emissions.
between main
Engine is difficult to
start.
switch and ECU.
• Blown backup fuse.
• Malfunction in ECU.
9-12
Fail-safe system op-
Vehicle symptom
Monitor voltage = 12
[V]
O
2
carried out.
Cruise control system
cannot be operated.
No power is supplied
to the air induction
system solenoid (air
induction system air is
supplied).
O
2
carried out.
Engine cannot be
started.
Engine is forcefully
stopped (the injector
output is stopped).
O
2
is not carried out.
O
2
value writing error.
Cruise control system
cannot be operated.
(ECU)
eration
feedback is not
feedback is not
feedback learning
feedback learning

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fjr13esg

Table of Contents