Yamaha FJR13AG Service Manual page 697

d. Measure the ABS ECU voltage.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
8. If the above-mentioned checks are within
specification, replace the hydraulic unit as-
sembly.
EAS30541
[C-3] FINAL CHECK
Checking procedures
1. Check the brake fluid level in the brake mas-
ter cylinder reservoir and brake fluid reser-
voir.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" on page 3-13.
2. Check the wheel sensor housings and wheel
sensors for proper installation.
Refer to "INSTALLING THE FRONT WHEEL
(FRONT BRAKE DISCS)" on page 4-36 and
"INSTALLING THE REAR WHEEL (REAR
BRAKE DISC)" on page 4-44.
3. Perform hydraulic unit operation test 1 or 2.
Refer to "HYDRAULIC UNIT OPERATION
TESTS" on page 4-83.
4. Delete the fault codes.
Refer to "[C-1] DELETING THE FAULT
CODES" on page 8-218.
5. Check the ABS warning light.
Refer to "CHECKING THE ABS WARNING
LIGHT" on page 4-86.
ABS (ANTI-LOCK BRAKE SYSTEM)
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
8-220