Checking The Exhaust System; Checking The Crankcase Breather Hose - Yamaha FJR13AG Service Manual

EAS30625

CHECKING THE EXHAUST SYSTEM

The following procedure applies to all of the ex-
haust pipes and gaskets.
1. Remove:
• Side cowlings
Refer to "GENERAL CHASSIS (2)" on page
4-5.
2. Check:
• Exhaust pipe assembly "1"
• Mufflers "2"
Cracks/damage → Replace.
• Gaskets "3", "4"
Exhaust gas leaks → Replace.
3. Check:
Tightening torque
• Exhaust pipe assembly nuts "5"
• Exhaust pipe assembly bolts "6"
• Exhaust pipe assembly and muffler bolts "7"
• Muffler bolts "8"
Exhaust pipe assembly nut
20 Nm (2.0 m·kgf, 14 ft·lbf)
Exhaust pipe assembly bolt
17 Nm (1.7 m·kgf, 12 ft·lbf)
Exhaust pipe assembly and muf-
fler bolt
20 Nm (2.0 m·kgf, 14 ft·lbf)
Muffler bolt
25 Nm (2.5 m·kgf, 18 ft·lbf)
8
8
6
2
7
New 4
2
New 4
6
7
3 New
(8)
1
5
3-10
PERIODIC MAINTENANCE
4. Install:
• Side cowlings
Refer to "GENERAL CHASSIS (2)" on page
4-5.
EAS30800
CHECKING THE CRANKCASE BREATHER
HOSE
1. Remove:
• Rider seat
Refer to "GENERAL CHASSIS (1)" on page
4-1.
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• T–bar
• Air filter case
Refer to "GENERAL CHASSIS (6)" on page
4-22.
2. Check:
• Crankcase breather hose "1"
Cracks/damage → Replace.
Loose connection → Connect properly.
ECA13450
NOTICE
Make sure the crankcase breather hose is
routed correctly.
3. Install:
• Air filter case
• T–bar
Refer to "GENERAL CHASSIS (6)" on page
4-22.
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Rider seat
Refer to "GENERAL CHASSIS (1)" on page
4-1.
1