Yamaha FJR13AG Service Manual page 17

Automatic deactivation condi-
tion
Unable to maintain the set
cruising speed
Traction control system is en-
gaged
Wheel slip or wheel spin is de-
tected
Start/engine stop switch is set
to the " " position
Engine stalls
Sidestand is extended
Because the automatic deactivation of the cruise control system is stored in the memory of the ECU,
the deactivation can be checked using the Yamaha diagnostic tool.
TIP
In some cases, the cruise control system may not be able to maintain the set cruising speed when the
vehicle is traveling uphill or downhill.
• When the vehicle is traveling uphill, the actual traveling speed may become lower than the set cruising
speed. If this occurs, accelerate to the desired traveling speed using the throttle.
• When the vehicle is traveling downhill, the actual traveling speed may become higher than the set
cruising speed. If this occurs, the setting switch cannot be used to adjust the set cruising speed. To
reduce the traveling speed, apply the brakes. When the brakes are applied, the cruise control system
will become deactivated.
• If the cruise control system turns off automatically while the cruising speed is not set, the cruise control
setting indicator light "SET" will not flash.
Vehicle condition for de-
tection
Cruise control system is
turned on and cruising
speed is set
Cruise control system is
turned on
1-8
Multi-function meter indication
Cruise control system indicator light "
off and cruise control setting indicator light
"SET" flashes for 4 seconds
FEATURES
" goes