Installing The Front Fork Legs - Yamaha FJR13AG Service Manual

2
1
c. Set the cap bolt distance "b" to specification.
Distance "b"
15 mm (0.59 in)
3
EWA13670
WARNING
Always use a new cap bolt O-ring.
d. Hold the cap bolt and tighten the nut "1" to
specification.
Front fork cap bolt locknut
15 Nm (1.5 m·kgf, 11 ft·lbf)
2
1
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
18.Install:
• Cap bolt
(to the outer tube)
TIP
Temporarily tighten the cap bolt.
a
b
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
4-103
FRONT FORK (FJR13AG)
EAS31652

INSTALLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Install:
• Front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
TIP
Make sure the inner tube is flush with the top of
the upper bracket.
2. Tighten:
• Lower bracket pinch bolts "1"
Lower bracket pinch bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
• Cap bolt "2"
Cap bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
• Upper bracket pinch bolt "3"
Upper bracket pinch bolt
26 Nm (2.6 m·kgf, 19 ft·lbf)
EWA13680
WARNING
Make sure the brake hoses are routed prop-
erly.
3
3. Adjust:
• Spring preload
• Rebound damping (right side only)
2