Yamaha FJR13AG Service Manual page 505

2. Check the headlight relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-254.
OK ↓
3. Check the headlight assembly.
Refer to "CHECKING THE HEAD-
LIGHT ASSEMBLY" on page 8-260.
OK ↓
4. Check the entire lighting system
wiring.
Refer to "CIRCUIT DIAGRAM
(FJR13AG)" on page 8-23 or refer
to "CIRCUIT DIAGRAM
(FJR13ESG)" on page 8-25.
OK ↓
Replace the ECU.
Refer to "REPLACING THE ECU (en-
gine control unit)" on page 8-250.
The high beam indicator light fails to come on.
1. Check the dimmer/pass switch.
Refer to "CHECKING THE
SWITCHES" on page 8-247.
OK ↓
2. Check the entire lighting system
wiring.
Refer to "CIRCUIT DIAGRAM
(FJR13AG)" on page 8-23 or refer
to "CIRCUIT DIAGRAM
(FJR13ESG)" on page 8-25.
OK ↓
Replace the meter assembly.
The position light, taillight, license plate light, auxiliary lights, or meter light fails to come on.
1. Check the entire lighting system
wiring.
Refer to "CIRCUIT DIAGRAM
(FJR13AG)" on page 8-23 or refer
to "CIRCUIT DIAGRAM
(FJR13ESG)" on page 8-25.
OK ↓
Replace the front turn signal/position
light assembly(-ies), tail/brake light as-
sembly, license plate light, headlight
assembly, or meter assembly.
NG →
Replace the headlight relay.
NG →
Replace the headlight assembly.
NG →
Properly connect or replace the wire har-
ness.
NG →
• The dimmer/pass switch is faulty.
• Replace the left handlebar switch.
NG →
Properly connect or replace the wire har-
ness.
NG →
Properly connect or replace the wire har-
ness.
8-28
LIGHTING SYSTEM