Yamaha FJR13AG Service Manual page 763

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
Diagnostic
code No.
82 Cruise control cancel circuit
• Clutch lever is squeezed
• Clutch lever is released
• Brake lever is squeezed
• Brake lever is released
• Brake pedal is depressed
• Brake pedal is released
• Throttle grip is turned past
the closed position in the
deceleration direction
• Throttle grip is released
83 Front brake light switch and
rear brake light switch
• Brake lever is squeezed
• Brake lever is released
• Brake pedal is depressed
• Brake pedal is released
87 O feedback learning data
2
erasure
EAS31058
DIAGNOSTIC CODE: ACTUATOR OPERATION TABLE
Diagnostic
code No.
30 Cylinder-#1 ignition coil
31 Cylinder-#2 ignition coil
32 Cylinder-#3 ignition coil
Item
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
00
O feedback learning data
2
has been erased.
01
O feedback learning data
2
has not been erased.
Item
Actuates the cylinder-#1 igni-
tion coil five times at one-
second intervals.
The "check" indicator on the
Yamaha diagnostic tool
screen come on each time
the ignition coil is actuated.
Actuates the cylinder-#2 igni-
tion coil five times at one-
second intervals.
The "check" indicator on the
Yamaha diagnostic tool
screen come on each time
the ignition coil is actuated.
Actuates the cylinder-#3 igni-
tion coil five times at one-
second intervals.
The "check" indicator on the
Yamaha diagnostic tool
screen come on each time
the ignition coil is actuated.
9-18
Tool display
Operate the clutch lever,
brake lever, brake pedal, and
throttle grip.
Operate the brake lever and
brake pedal.
To erase the O
learning data, set the
start/engine stop switch from
"
onds.
Actuation
Check that a spark is gener-
ated five times.
• Connect an ignition check-
er.
Check that a spark is gener-
ated five times.
• Connect an ignition check-
er.
Check that a spark is gener-
ated five times.
• Connect an ignition check-
er.
(ECU)
Procedure
feedback
2
" to " " 3 times in 5 sec-
Procedure