Removing The Engine; Installing The Engine - Yamaha FJR13AG Service Manual

EAS30250

REMOVING THE ENGINE

1. Loosen:
• Spacer bolt
TIP
Loosen the spacer bolt with the pivot shaft
wrench "1" and pivot shaft wrench adapter "2".
Pivot shaft wrench
90890-01471
Frame spanner socket
YM-01471
Pivot shaft wrench adapter
90890-01476
EAS30251

INSTALLING THE ENGINE

1. Install:
• Engine
TIP
When mounting the engine to the frame, be sure
to align the splines on the middle driven shaft
with the splines on the universal joint.
2. Install:
• Spacer bolt "1"
• Engine mounting bolt (rear upper side) "2"
• Spacer "3"
• Engine mounting bolt (rear lower side) "4"
• Engine mounting bolt (left front upper side)
"5"
• Engine mounting bolt (left front lower side) "6"
• Spacers "7"
• Engine mounting bolt (right front upper side)
"8"
• Engine mounting bolt (right front lower side)
"9"
• Pinch bolts (front side) "10"
• Pinch bolts (rear lower side) "11"
TIP
• Lubricate the engine mounting bolt (rear lower
side) threads with engine oil.
• Do not fully tighten the bolts.
ENGINE REMOVAL
8
E
4
9
7
1
3
3. Tighten:
• Engine mounting bolt (left front upper side)
"5"
Engine mounting bolt (left front
upper side)
49 Nm (4.9 m·kgf, 35 ft·lbf)
4. Tighten:
• Engine mounting bolt (rear lower side) "4"
Engine mounting bolt (rear lower
side)
45 Nm (4.5 m·kgf, 32 ft·lbf)
5. Tighten:
• Spacer bolt "1"
Spacer bolt
18 Nm (1.8 m·kgf, 13 ft·lbf)
TIP
• Tighten the spacer bolt "1" to specification with
the pivot shaft wrench and pivot shaft wrench
adapter.
• When tightened, the spacer bolt should be flat
against the engine surface.
5-9
7
10
10
11
6
5
2