Yamaha FJR13AG Service Manual page 550

Fault code No.
Item
1 Connection of air temperature
sensor coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
2 Connection of ECU coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
3 Wire harness continuity.
3-1
1. Air temperature sensor
2. ECU
3. Sensor output lead
4. Sensor ground lead
3-2 Disconnect the ECU coupler from the ECU.
Disconnect the air temperature sensor coupler from the air temperature sensor.
P0112, P0113
[P0112] Air temperature sensor: ground short circuit detected.
[P0113] Air temperature sensor: open or power short circuit detect-
ed.
Improperly connected → Con-
nect the coupler securely or re-
place the wire harness.
Improperly connected → Con-
nect the coupler securely or re-
place the wire harness.
Open or short circuit → Replace
the wire harness.
1
3
Br/W
B/L
4
8-73
FUEL INJECTION SYSTEM
Turn the main switch to "ON",
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is "Recovered" → Go
to item 7 and finish the service.
Condition is "Detected" → Go to
item 2.
Turn the main switch to "ON",
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is "Recovered" → Go
to item 7 and finish the service.
Condition is "Detected" → Go to
item 3.
Turn the main switch to "ON",
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is "Recovered" → Go
to item 7 and finish the service.
Condition is "Detected" → Go to
item 4.
2
5V
Br/W
B/L