Yamaha FJR13AG Service Manual page 31

This function allows
you to check and re-
set the "TIME–2" and
"TIME–3" functions.
These time trips
show the total
elapsed time that the
key has been in the
"ON" position. When
the key is turned to
Time Trip
"OFF", the time trips
stop counting but are
not reset. The maxi-
mum time that can be
shown is 99:59.
When the time trips
reach 99:59, they au-
tomatically reset to
0:00 and continue
counting.
This function allows
you to switch the dis-
play units between ki-
lometers and miles.
When kilometers are
Unit
selected, the fuel
consumption units
can be switched be-
tween "L/100km" and
"km/L".
This function allows
you to change the
Display
items shown in 3 in-
formation displays.
This function allows
you to adjust the
brightness of the
Brightness multi-function meter
unit panel to suit the
outside lighting con-
ditions.
This function allows
Clock
you to set the clock.
This function allows
you to reset all items,
All Reset
except the odometer
and the clock.
Adjusting the temperature levels of the grip
warmer settings
1. Use the select switch to highlight "Grip
Warmer".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the "MENU" switch. The grip warmer
setting display will be shown and "High" will
flash in the display.
Grip Warmer
Hi g h
Middle
Low
3. Push the "MENU" switch. The temperature
level for the high setting will start flashing.
Use the select switch to set the temperature
level, and then push the "MENU" switch.
"High" will start flashing.
Grip Warmer
Hi g h
Middle
Low
1-22
FEATURES
10
5
1
10
5
1