Yamaha FJR13AG Service Manual page 525

The shift indicator fails to come on.
1. Check the gear position switch.
Refer to "CHECKING THE GEAR
POSITION SWITCH" on page
8-264.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM
(FJR13AG)" on page 8-41 or refer
to "CIRCUIT DIAGRAM
(FJR13ESG)" on page 8-43.
OK ↓
Replace the meter assembly.
The oil level warning light fails to come on.
1. Check the oil level switch.
Refer to "CHECKING THE OIL
LEVEL SWITCH" on page 8-261.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM
(FJR13AG)" on page 8-41 or refer
to "CIRCUIT DIAGRAM
(FJR13ESG)" on page 8-43.
OK ↓
Replace the meter assembly.
The fuel meter fails to come on.
1. Check the fuel sender.
Refer to "CHECKING THE FUEL
SENDER" on page 8-261.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM
(FJR13AG)" on page 8-41 or refer
to "CIRCUIT DIAGRAM
(FJR13ESG)" on page 8-43.
OK ↓
Replace the meter assembly.
SIGNALING SYSTEM
NG →
Replace the gear position switch.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the oil level switch.
NG →
Properly connect or replace the wire har-
ness.
NG →
Replace the fuel pump.
NG →
Properly connect or replace the wire har-
ness.
8-48