Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a Sun PCI Workstation
Refer to your monitor documentation for information
about the connector assignments.
For color display, the Md4/PCX board supports only
one monitor per board.
3. Repeat steps 1–2 for each monitor to which you want to
connect the Md4/PCX board.
To install the stereo cable for stereo viewing
1. Connect the stereo cable to the Md4/PCX board at the
PS/2 connector.
2. Connect the appropriate connector to your emitter or
stereo screen device.
To optimize your stereo display, see "Setting up display for
stereo mode" on page 86. For more information, refer to the
Stereo Library Installation and Developer's Guide.
83
Advertisement
Table of Contents
