Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a Sun PCI Workstation
3. Mount the CD device if the system does not automount
it. Then type:
cd /cdrom/dome
4. To transfer the software packages to the system, type:
pkgadd -d md4pxZZZ.pkg
where
For example, for version 1.2.1, type:
pkgadd -d md4px121.pkg
Check the file name on the CD for the software version.
If you are using the Md4/PCX board for stereo
display, you must install version 1.2.1 or later of the
driver to access the entire screen in stereo mode.
This message appears:
The following packages are available:
1 DOMEmd4px
2 DOMEmdlib
Select package(s) you wish to process
5. Press <Return> to install all packages or the number 1
(one) to install the
Messages appear, followed by this prompt:
Do you want to continue with the installation
6. Type y.
Messages describe the progress of the installation, fol-
lowed by these messages:
the version of the software on the CD
ZZZ=
DOME Md4/PCX Display
Support (sparc) 1.2.x
DOME MD library
(sparc) 1.0.x
(or 'all' to process all packages).
(default:all) [?,??,q]:
DOMEmd4px
of the package [y,n,?]
package only.
85
Advertisement
Table of Contents
