Uninstalling The Kit - Planar DOME Md4/PCX Installation Manual

116
2. Uninstall the kit when the previous kernel loads.
The kit installation modifies the X Server configura-
tion file
The X Window System will probably not start with
this kernel.
3. Contact DOME Support for information about the
problems you have encountered.

Uninstalling the kit

To uninstall your DOME driver kit and restore your system
to the state it was in before the installation, run the
program with the
name, see "Determining your kit name" on page 111.
To uninstall the kit
1. Type the following (replacing
of the kit):
# setld -d KITNAME
2. Reboot your system after the kit has been uninstalled
by typing:
# reboot
/var/X11/Xserver.conf.pre.KITNAME
option. If you do not know your kit
-d
Chapter 4
.
setld
with the name
KITNAME