Table of Contents
Advertisement
82
Connecting the Monitors
When the Md4/PCX board is installed in your system,
connect the monitors to the board with the cable provided.
Grayscale cables have two branches, each with three con-
nectors. Color cables have one branch with five connectors.
To connect the monitors to the board
1. Attach the D-shell connector(s) to the Md4/PCX
board, securing the connection with the screws
on each connector.
2. Attach each output cable to the appropriate BNC
terminal on your monitor.
Connecting the
cable to a
grayscale monitor
The cable labeling in these illustrations applies to the
DOME Md4/PCX cable. If you are using a cable from
another source, the cable labeling may be different.
Connecting the
cable to a
color monitor
Chapter 3
Advertisement
Table of Contents
