Installing the Md4/PCX Board and Driver in a PC
Screen saver tips
Remember these tips when you set the screen saver:
• The two delay periods are cumulative. If it takes 15 min-
utes of user inactivity for the DOME DPMS Screen Saver
to start, and there is a 30-minute delay until power-off
mode is invoked for the current time period, power-
off mode starts only after a total of 45 minutes of user
inactivity.
• After the monitor has been in power-off mode for a
long time, it can take up to 30 minutes to reach optimal
performance conditions when the video power is turned
on again. To ensure that the monitor is performing opti-
mally when you need it, use the DOME DPMS Screen
Saver to force the monitor to wake up before periods of
heavy use begin.
43