Table of Contents
Advertisement
50
4. Select the same resolution and refresh rate that you
used for the first DOME screen for the sister display,
and click OK.
Set the resolution and refresh rate to identical values
on the first and second DOME screens of a dual-
headed DOME display board; otherwise one screen
appears garbled.
5. Click Apply -> OK from the Default Monitor and
Md4/PCX, Md5/PCX, or Md5/DFP Properties
dialog box.
6. Select Extend my Windows desktop to this monitor,
and click Apply.
The Display Properties dialog box appears.
7. Click Identify on the Settings tab to check whether the
sister displays are enabled.
When you click Identify, the screen numbers display on
the enabled screens.
See the next section to configure the display settings for
your enabled Windows 2000 displays.
Chapter 2
Advertisement
Table of Contents
