76
To install the board
1. Turn off the power to your computer.
Leave the computer plugged into a grounded power
outlet so that the power cord can serve as a ground for
the computer.
If you do not turn off the computer, you could get an
electric shock and cause damage to your computer's
components and the board.
2. Remove the case cover according to the computer
manufacturer's instructions.
3. Locate the slot you selected for the Md4/PCX board.
If the slots are not labeled on the motherboard, refer to
your system documentation for a slot ID chart.
You must disable parity in the Sun PCI workstation
before installing the board. See "To check parity
status" on page 74.
Chapter 3