Table of Contents
Advertisement
60
If your edits result in a new mode (that is, the X, Y, BPP,
and refresh rate is not already included in the configu-
ration file), the control panel adds the new mode to the
.dom
If your edits result in a refresh rate that matches the
whole-number value of an existing refresh rate for an
existing resolution, the mode corresponding to the new
refresh rate overwrites the mode corresponding to the
existing refresh rate in the
For example, assume you are editing a mode of 1024
x 768 x 8 with a refresh rate of 70.08 Hz. If you make
changes that result in a new refresh rate of 70.4 Hz,
1024 x 768 x 8@ 70.4 Hz replaces 1024 x 768 x 8 @
70.08 Hz when you save the mode.
11. Click OK to close the Display Properties dialog box,
and Restart your system.
The new mode takes effect after you restart the
system.
To remove modes
1. Highlight the resolution for the mode you want to
remove, and click Remove Mode.
A dialog box asks whether you are sure you want to
remove the mode.
2. Click Yes to remove the mode, or No to cancel.
3. Click OK to close the Display Properties dialog box and
Restart your system.
Settings take effect after you restart the system.
You can remove any mode except the current mode.
file.
file.
.dom
Chapter 2
Advertisement
Table of Contents
