Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a PC
To use the DOME tab online help
The Windows NT driver (version 4.4.0 or later) provides
online, context-sensitive help for the DOME tab. You can
access the help in two ways:
• Click the question mark (?) button on the title bar and
then click the area of the DOME tab with which you need
assistance.
• Move the cursor to the area with which you need assis-
tance and then press <F1>.
To change the resolution and refresh rate
Highlight the desired options on the DOME tab. Valid
options for resolution and refresh rate are listed in the
Resolution and Refresh rate section of the DOME tab.
To set the screen configuration
Highlight the desired number and configuration.
Tips
Remember these tips when setting the screen
configuration:
• Each Md4/PCX board supports up to two monitors.
• Windows NT Version 4.4.0 or later supports up to eight
boards (sixteen screens).
• Windows NT Version 4.01–4.3.3 supports up to four
boards (eight screens).
• The screens are assigned to the boards in the order in
which the boards are found on the bus. For example,
if the first board is a dual-headed board, it controls
screens 0 (zero) and 1 (one).
• Screen 0 (zero) is the upper-left screen. The rest of the
screens are counted down and then across.
27
Advertisement
Table of Contents
