Planar DOME Md4/PCX Installation Manual page 52

38
The Windows NT driver automatically installs DOME
DlgFix
To run DlgFix
Type this command at the DOS prompt:
C:\dome\tools\DlgFix
The DOME
indicate that
To add DlgFix to the startup menu
DlgFix
your computer. To automatically run
place
this command at the DOS prompt:
C:\dome\tools\DlgSetup
Limitations of DlgFix
Because of limitations in the Windows NT operating sys-
tem,
run the startup programs; login dialog boxes are still split
between screens.
To uninstall DlgFix
Your system will experience a slight performance
degradation while running
performance unacceptable, uninstall the software by
typing this command at the DOS prompt:
C:\dome\tools\DlgUnins
software.
icon appears on your taskbar to
DlgFix
is running.
DlgFix
will not automatically restart each time you restart
into your startup menu programs by typing
DlgFix
cannot modify dialog box locations until you
DlgFix
at startup,
DlgFix
. If you find system
DlgFix
Chapter 2