98
Chapter 3
For a color monitor or stereo display, you must configure
the Md4/PCX board for one head by setting this line as
follows:
board="md4pcx-1hd.xqa"
See the second code sample on page 95 for configuration
for the second head.
To select video pedestal
To enable or disable video pedestal, you need to edit
the
file, which is referenced by your
domegray.vda
file.
OWconfig
To enable pedestal, set the
parameter in the
BlackLevel
file to 0.054. To disable pedestal, set the
domegray.vda
parameter to 0.0.
BlackLevel