Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a PC
8. If you inserted the diskette in the A drive, click OK.
If you inserted the diskette in another drive, type:
X:\
where
The Change Display dialog box appears, with these
choices:
DOME imaging systems Md4/PCX
DOME imaging systems Md5/PCX
9. Select DOME imaging systems Md4/PCX, and
click OK.
The Third-party Drivers dialog box appears,
prompting you:
Do you wish to proceed?
10. Click Yes.
A progress bar appears. The Installing Driver dialog
box appears with this message:
The drivers were successfully installed.
11. Click OK.
12. Click Close on the Display Type dialog box and on the
Display Properties dialog box.
The System Settings Change dialog box appears,
prompting you:
Do you want to restart your computer now?
13. Click Yes.
14. When the system restarts, select Windows NT
Workstation Version 4.00 [VGA] and then configure
your display settings, as described in the next section.
represents the drive.
X
21
Advertisement
Table of Contents
