Table of Contents
Advertisement
Md4/PCX Board Resolutions and Refresh Rates
Customizing sync parameters for Windows NT
If you are using the Windows NT 4.4.0 or later driver,
you can customize sync parameters for the Windows NT
operating system.
If your customized file contains errors, the display may
appear blank. DOME strongly advises that you always
make a backup copy of the original
before making any changes to them.
To customize sync parameters for Windows NT
1. Open the text sync (
directory. The
Md4PCX.vid
2. Change individual sync parameters in the text sync file
or add new individual syncs at the end of the file to cre-
ate a new mode.
Make sure there are no empty lines at the end of the
.vid
3. Save the text sync file.
4. Open a DOS window.
5. Change directory to
6. Run the
build the corresponding
The program asks you to enter the system windows
directory.
7. Type
directory.
The program asks if you want to back up your existing
.cfg
) file from the
.vid
file for the Md4/PCX board is
.vid
.
file.
C:\dome\tools
program from a DOS window to
mdconfig
.cfg
or your corresponding windows
C:\winnt
file.
and
files
.vid
.cfg
C:\dome\tools
.
file.
133
Advertisement
Table of Contents
