Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a PC
The Hardware Type dialog box appears.
6. Select Display Adapters, and click Next.
The Select a Device Driver dialog box appears.
7. Select DOME imaging systems in the Manufacturers
column and DOME Md4/PCX, Md5/PCX, or Md5/DFP
in the Models column. Click Next.
The Start Hardware Installation dialog box appears.
8. Click Next.
The Digital Signature Not Found dialog box appears.
9. Click Yes to copy the display driver files.
10. Insert the DOME Windows 2000 driver diskette into
drive A, and click OK.
The Completing the Add/Remove Hardware Wizard
dialog boxes appear.
11. Click Finish to complete the installation.
12. Return to the Display Properties dialog box.
To set the resolution and refresh rate for the
sister display
1. Right-click the desktop, and select Properties ->
Settings tab.
2. Click the Display list and select the desired sister
display.
3. Click Advanced -> Adapter tab -> List All Modes
button.
49
Advertisement
Table of Contents
