Table of Contents
Advertisement
Page 488 of 532
Local voice features
Auto PDN select
Autonumber
List incoming callers
553-3001-367
Standard 1.00
BRAMFT (Basic Rate Access: Meridian Feature Transparency), depending
on features and service required.
Note: Basic Rate Access is now called Basic Rate Interface (BRI).
Local features are provided by the phone internally with minor intervention
by the switch. They are purely local in nature, or they deal with the switch on
the basis of dialed digits and ringing lines, and hold and release keys. The
following are brief descriptions of local features provided by the M5317T.
NI-1 and Meridian 1 modes only. This feature automatically selects the Prime
Directory Number (PDN) when the user goes off-hook, dials using the Saved
Number feature, or uses certain other features such as Call Pickup or Call
Park Retrieve, in the idle state. The user is prompted with Select free line if
the PDN is not idle.
NI-1 and Meridian 1 mode only. This feature accepts a telephone number if
an autonumber is assigned to any definable key that is not already defined as
a call activator or a feature key. After the number is assigned, pressing the key
causes the stored number to be dialed as if it came from the dial pad.
Note: In NI-1 mode, this feature may be used to program any number,
such as a call forward number. If the telephone is idle and the PDN is not
in use, then the PDN is automatically selected when the autoline key is
pressed.
NI-1 and Meridian 1 modes only. This feature provides the following
functions:
•
Records the origination address of all incoming calls to the PDN, along
with the date and time of the call.
October 2003
Advertisement
Table of Contents
