Table of Contents
Advertisement
Setup mode
Setup mode is intended for use by all M5317T digital telephone users. In NI-1
and Meridian 1 mode, press Setup to display the Setup menu. In MFT mode,
press the center of the volume key to access Setup. The Setup menu includes:
•
alerting tone style and cadence (NI-1 and Meridian 1 mode only)
•
default volume for handset/headset, alerting tones, and speakerphone
(NI-1 and Meridian 1 mode only)
•
query features enabled and DNs (NI-1 and Meridian 1 mode only)
•
Service Profile Management (SPM). Enter the four-digit password
"5317" to display an SPM softkey.
•
various data options (baud rate, parity, etc.)
•
protocol version
•
contrast adjustment
•
language
Self test
During power-up, the M5317T tests many internal components and displays
error codes if the test fails at any point. These codes are used in manufacturing
testing only.
Error code displays
NI-1 and Meridian 1 modes only. (During startup, there are error codes in
MFT too. During normal operation, there are no error codes on the idle
display, but they can be accessed as described earlier for Setup mode.)
When errors are detected by the telephone, an error code replaces the normal
date and time in the right-hand upper corner of the display.
Data LTID
For NI-1 and MFT mode, data LTID (Logical Terminal Identifier) must be
BRAFS (Basic Rate Access: Functional Signaling). For MFT mode, you must
set the bearer capability for the selected circuit. Voice may be BRAFS or
M5317 BRI terminal
Telephones and Consoles
Page 487 of 532
Description
Advertisement
Table of Contents
