Table of Contents
Advertisement
Designate M2000 Series Meridian Digital Telephones
Connect analog (500/2500-type) telephones
Follow the steps in Procedure 14 on
Meridian Digital Telephones.
Procedure 14
Designating M2000 Series Meridian Digital Telephones
1
Remove the cap from each key requiring a designation.
2
Place the designation in the cap, place the cap over the corresponding
key, and gently press down. Repeat for all keys requiring designations.
3
Insert a paper clip into the hole at the left or right end of the designation
window.
4
Gently pry the window toward the center and remove, and insert the
number tag.
5
Replace the designation window.
Follow the steps in Procedure 15 to connect analog (500/2500-type)
telephones.
Table 11 on
page 74
Procedure 15
Connecting analog (500/2500-type) telephones
1
Ensure that the terminal connector is compatible with the telephone
connector.
2
Connect the telephone mounting cord.
TELADAPT cords (NE-625F connector) do not require terminations.
Insert the plastic connector on the end of the telephone mounting cord
into the NE-625F-type receptacle.
Telephone installation
page 73
End of Procedure
lists the NE-500/2500 telephone connections.
Telephones and Consoles
Page 73 of 532
to designate M2000 Series
Description
Advertisement
Table of Contents
