Table of Contents
Advertisement
The Display keys show the prompts and Option list settings depending on the
state of the handset. The prompts are displayed above each key. The lower
line of the display screen is used to display instructions.
The Message Waiting/Ringing Indication is a red LED located on the base
of the handset antenna that provides message-waiting indication and flashing
visual ringing indication.
The Handset labels enable the feature keys to be personalized.
The Headset jack connects the detachable headset unit. Check with your
Nortel Networks representative for authorized headset vendors.
The Hold key places an active call on hold.
The Options key enables changes to be made to the M2616CT settings in the
Options list. The Options key is located on the right side of the M2616CT
handset. Used with three display function keys, it lets users customize handset
options, including the following:
•
Speaker on/off – A speaker enables users to listen to voice mail or listen
to a conference call without using the handset.
•
Mute – Microphone mute selection.
•
Ring Selection – Enables users to select or change the ringing cycle,
or
•
Vibrate mode – Vibrating notification instead of usual ringing cycle. A
special vibrating battery must be purchased and installed in order to use
this feature. Contact your local Nortel Networks distributor for the part
number.
•
Backlight (on/off) – Lights the display when the handset is in use.
•
Base Lock/Unlock – Enables the user to lock the M2616CT base unit to
prevent others from accessing the base while the handset is in use.
•
Ring Volume – Adjusts the handset ringer volume.
M2616CT cordless telephone
Telephones and Consoles
Page 301 of 532
Description
Advertisement
Table of Contents
