Nortel Meridian 1 Succession 1000 Description page 469

LD 97 – Configure parameters for System-wide Flash Download.
Prompt Response
FDAY
d n
FINT
s l
FTNR
(NO)
YES
FSTN
l s c u
c u
FETN
l s c u
c u
M3900 Flash Download
Description
Enter day and number of time intervals for Flash Download,
where:
d = day of the week (0-6 for Sunday to Saturday)
n = number of time intervals (0-4)
To disallow download for the day, enter 0.
Day is re-prompted until you enter a Carriage Return,
<CR>.
Note 1: This prompt appears only if FDTM = YES.
Note 2: If two or more intervals are specified, they must be
overlapping, non-consecutive, and in order.
Enter starting hour and length for a time interval, where:
s = starting hour (0-23)
l = length of interval in hours (1-24)
Note: FINT is prompted n time if n is greater than 0.
TN range restriction option for Flash Download.
No TN restriction (default)
Specify TN range.
Starting terminal number for Flash Download.
Note: The FSTN prompt appears only if FTNR = YES.
Format for Large System.
Format for Small System and Succession 1000.
Ending terminal number for Flash Download.
Note: The FETN prompt appears only if FTNR = YES.
Format for Large System.
Format for Small System and Succession 1000.
Telephones and Consoles
Page 469 of 532
Description