Table of Contents
Advertisement
Configure parameters for System-wide Flash Download
LD 97 – Configure parameters for System-wide Flash Download (Part 1 of 3)
Prompt
Response
REQ
CHG
PRT
TYPE
FDL
FDTP
t
FDTM
(NO) YES
FDAY
dn
M3900 installation and configuration
Description
Change Flash Download Parameters.
Print Flash Download Parameters.
Flash Download for M3900 Sets
Enter M3900 set type selected for Flash Download
3902 = M3902.
3903 = M3903.
3904 = M3904.
3905 = M3905.
ALL
= All of the above.
NONE = None of the above (default).
No further prompt; returns to "REQ".
Time interval restriction for Flash Download
NO = Do not change time intervals (default).
YES = Proceed to change time intervals
Note 1: Flash Download is automatically paused one hour
before virtual midnight (see TODR in LD 17) to allow midnight
routines to run.
Note 2: This option is not applicable to reporting.
Enter day and number of time intervals for Flash Download.
Prompt appears only if FDTM = YES
Day is re-prompted until carriage return <CR> alone is entered.
d = day of the week (0-6 for Sunday to Saturday)
n = number of time intervals (0-4); to disallow download for the
day, enter 0.
Note: If two or more intervals are specified, they must be
non-overlapping, non-consecutive, and in increasing order.
Telephones and Consoles
Page 431 of 532
Description
Advertisement
Table of Contents
