Table of Contents
Advertisement
commands and features. Pressing that softkey displays additional labels
available for the accessed telephony state.
If MFT mode is used, both lines of the LCD may be used for call information.
Displays are defined by the switch software, and may vary between software
loads. In BCS34, the idle display is blank, and at other times call progress
information is displayed on both lines.
Softkeys
In NI-1 mode, the softkey labels display functions only for local and network
features that have been datafilled. The available functions may vary from
telephone to telephone and, consequently, a softkey label may be displayed
in different locations at different times on different sets. Refer to the User
guides for examples and detailed explanations of the functioning of the
various softkey features.
In NI-1 mode, the following features are supported on softkeys:
•
Call Forward
•
Call Park
•
Call Pickup (group)
•
Executive Busy Override
•
Make Set Busy
•
Privacy Release/Privacy
•
Ring Again/Call Back Queuing
•
Three-Way Call (Flexible Calling)
•
Call Transfer
In Meridian 1 mode, this feature is supported on softkeys:
•
Calling Line ID Presentation/Calling Line ID Restriction
M5317 BRI terminal
Telephones and Consoles
Page 479 of 532
Description
Advertisement
Table of Contents
